Browse Forums General Discussion 1 Sep 01, 2011 7:21 am We have to install a (horizontal slat) privacy screen on one side of our balcony, as part of our Development Consent. Does anyone has some recommendation for privacy screen products and/or supplier/installer? I am in Sydney North West (Hills District)? The council requires this screen to be 800 mm high on top of the balustrade (which is 1000mm high). This section is about 1200mm wide, has a cladding wall on one side and a timber post on the other. I wonder how screens can be fitted there. DKP Re: Privacy Screen 2Sep 01, 2011 8:53 am Has anyone else already built one in the area? Ask the council for a tradesman's name. Put some tracks with a U profile at each end and slide horizontal slats down the grooves with spacers between. Ask Bunnings!!!! Re: Privacy Screen 3Sep 01, 2011 9:04 am Something that may change peoples advice. Is this screen so you can't see into a neighbors property? Or so they can't see into yours? Re: Privacy Screen 5May 03, 2012 7:04 pm dkp - we are in the same boat. the blokes doing my deck will be the ones to install the privacy screen. http://www.thomsonsoutdoorpine.com.au/ Hi guys We have just removed a very large grape vine which was mounted to a structure along this wall. This is a shared wall with our neighbour, and after removal, we… 0 3954 You have no photo with your post. Best I can say is to remove an A&L flyscreen don't be afraid to distort the frame almost like a trapezium. It doesn't take a lot of… 1 7071 |