Browse Forums Laundry Re: Bench top overhang on the side 2Sep 14, 2023 9:26 am is it built to plans? You mention its ïn thge plans" but has what's been delivered been built to the plan? If not, then have them adjust. Realistically i would have had them build the cabinet aswell. Trying to fit existing cabinetry in with custom cabinets is always risky for exactly this reason. Usually a false economy Re: Bench top overhang on the side 4Sep 14, 2023 9:40 pm ponzutwo is it built to plans? You mention its ïn thge plans" but has what's been delivered been built to the plan? If not, then have them adjust. Realistically i would have had them build the cabinet aswell. Trying to fit existing cabinetry in with custom cabinets is always risky for exactly this reason. Usually a false economy Thanks Ponzutwo, the plan doesn't show an overhang. I am currently in discussion with the company about it. I just wanted to see if my thinking is correct. Unfortunately I didn't have the budget to get a custom cabinet made. I also had the kitchen and bathroom done and gone way over budget. Re: Bench top overhang on the side 5Sep 14, 2023 9:41 pm Ardo Possibly the hinges in the tall cabinet are not the concealed type. They allow the door to open in the area of the cabinet and not imped outside the carcass. Thanks Ardo, they are sort of semi concealed. I think it is only a few millimetres. I see if they can adjust the hinges. Building Standards; Getting It Right! These can be easily filled and repaired and it doesn't cost them much to do. Id get the builder to do this first and if the repair is not suitable then a replacement is… 12 31589 In the end, two pieces of treated timber (20mm thick) were bolted onto the joists and planed when there was too much sticking out. Passed inspection. 13 8003 This is the best I have, as it is plastered internally now. I should add there is a steel post in the corner of the room between the window and the glass sliding door,… 3 809 |