Browse Forums Windows & Doors Re: Window seal gap in corners 6Mar 20, 2017 1:58 pm pawelpabich Hi, I just noticed that most (if not all) of my awning windows have window seal that doesn't fully follow the shape of the window and there are small gaps in the corners. Is that normal or is there something wrong with the windows? Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Regards, Pawel They have stretched the seal as they fitted it, and it has shrunk back. No good enough, needs pointing out. They may try to seal the corners with silicone, but it may not last as the whole length of the seal has been stretched, not just the corners, and it will move over time. I would want it fixed. Ed "ECOECO" At 'EcoEco', we design windows, we design the best windows, we do it for you, so that when you’re happy we are happy. Tel. 1800 326 326 Re: Window seal gap in corners 8Mar 20, 2017 3:27 pm Done correctly, only the manufacturer can do that... May I use one of your pics for an article? Thanks Ed "ECOECO" At 'EcoEco', we design windows, we design the best windows, we do it for you, so that when you’re happy we are happy. Tel. 1800 326 326 Re: Window seal gap in corners 10Sep 24, 2017 11:11 pm So bunch of seals broke after 2 months and last week seals in all awning windows were replaced. Hopefully they will last longer now . 4 15098 I need to replace the worn mohair seal on my sliding window, but I can't get access to the end to slide the old one out & push the new one in. I could probably rip the old… 0 5681 Got my stairs designed like this with 250mm Gap marked below. Gap is bec of 2 steps added between two landing area… 0 5055 |