Browse Forums Owner Builder Forum Re: Studio (fancy shed) build 6May 02, 2014 7:45 pm Steve My building project - Hill House viewtopic.php?f=38&t=13537 Who you have in your life is more important than what you have Re: Studio (fancy shed) build 13May 08, 2014 11:51 am For info on our build: viewtopic.php?f=31&t=43093 Built the McLaren by Dechellis - slab down 22 Feb - handover 30 Aug 2011 - and gardens finished 9 Dec 2012!! Re: Studio (fancy shed) build 14May 08, 2014 11:59 am Score! Love those jarrah frames! I might use your build as inspiration for our shed too The countryside is going to look beautiful after all these rains! Re: Studio (fancy shed) build 15May 08, 2014 4:44 pm Excellent posts RuffTuff. Are you constructing with Post & Beam or are the mud bricks loadbearing. ? Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Re: Studio (fancy shed) build 16May 08, 2014 5:59 pm It will be a simple post and beam construction. Mudbrick will not be loadbearing. Re: Studio (fancy shed) build 18May 10, 2014 5:36 pm Re: Studio (fancy shed) build 19May 14, 2014 9:21 pm Re: Studio (fancy shed) build 20May 14, 2014 9:26 pm The engineer came through with a quote to formally draw up the plans. $2640 seems very high for a simple post and beam construction, especially when I've already done most of the work. I'll be writing back and asking for justification and seeking a second quote. I found this site which gives a guide on engineering charges. http://www.nicollengineers.com.au/html/price_guide.html I would suggest you simply go and talk to council about your proposal, most councils are getting onboard with ancillary dwellings. There is no benefit in keeping it… 1 4275 Thanks. Yeh ideally that would have been good, but have progressed too far now. Hoping some well placed internal walls fixed up into the battens will provide some… 2 5577 Hi, I am sheeting the inside of a 5.7 x 8m shed with gyprock. Unfortunately the shed wasn't designed for internal cladding but I have been framing it up as strongly as… 0 3506 |