G'day guys,
During the PCI, we noticed that our Alfresco with feature rake ceiling had horrible quality.
The sheets were all undulating, pretty much all nails were popping and the negative detail trimmers were all twisted and snapped at locations. The picture attached below is after they've patched it up and it's not even the worst location.
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
After many back and forth, builder admitted that they are rectifying a lot of their builds with this issue. They also admitted that it is not up to quality.
They suggested to build new ceiling - However they are insistent on building it over the defective one, without taking them down first. We spoke to few ceiling fixers and they seem to be in line that to fix it properly, that the old defective one should be taken down first otherwise it'll cause issues down the track.
Is this suggested solution by builder acceptable - Would you accept it?