Home Renovation & Building Forum
https://forum.homeone.com.au/

render cost
https://forum.homeone.com.au/viewtopic.php?f=31&t=10786
Page 1 of 1

Author:  empty123 [ Nov 02, 2008 10:52 am ]
Post subject:  render cost

Hi All,
I am planning to build a 45sq house and I am not sure how much it costs for render of entire house. Does anyone have any idea?

Is it better to have a render or leave it as brick?

Thank you.

Author:  homesweethome [ Nov 02, 2008 10:43 pm ]
Post subject: 

Hi empty123,

We also have a 45sq home which is fully rendered. Through our builder it cost $40,000. Recently the actual renderer came back to complete some touch ups and told me he charged the builder $25,000 so the rest is the builders mark-up. We went through one of the big volume builders.

l think it is personal preference whether you prefer to have the house rendered or leave it brick - depends on the look you are going for.

Good luck!

Author:  buildingadreamhome [ Nov 03, 2008 7:31 am ]
Post subject: 

I would suggest render to the front only and bagging/moroka to the sides and back if you want to save money.

Author:  wellinformed [ Nov 04, 2008 4:35 pm ]
Post subject: 

render through a builder should cost anywhere between $80-100 per m2 inclusive of labour.

Author:  Bobcat [ Nov 04, 2008 4:50 pm ]
Post subject: 

and offering cash is always the go i reckon. most will even split the invoice..half cash and half invoice (GST). We just got ours rendered and it was $3,800 all up 8) . when our builder wanted $10,000 to do it under construction. :shock:

Author:  Bam [ Nov 04, 2008 5:02 pm ]
Post subject: 

Excuse my ignorance, but there are alot of newish houses that i see where the render has something like water stains, marks and cracks on areas close to the roof... Is this due to it being a particular type of render (bagging/moroka????) or workmanship?

Author:  turnerl [ Nov 04, 2008 6:37 pm ]
Post subject: 

I heard someone talking of, "acrylic render" that costs a bit more but requires no maintenance, might be worth looking into?

Author:  Bobcat [ Nov 05, 2008 8:55 am ]
Post subject: 

turnerl turnerl
I heard someone talking of, "acrylic render" that costs a bit more but requires no maintenance, might be worth looking into?
That might be what they call acratex made by Dulux. i was told its alot more waterproof then usual sand cement render. This is what they rendered our house with. they told us that its more expensive but takes half the time.

Author:  Mrs B [ Nov 05, 2008 11:57 am ]
Post subject: 

Bam Bam
Excuse my ignorance, but there are alot of newish houses that i see where the render has something like water stains, marks and cracks on areas close to the roof... Is this due to it being a particular type of render (bagging/moroka????) or workmanship?


Hi Bam..I have noticed this to, particularly with the cheaply built, nasty townhouse developments in my area that are sold for a ridiculous amount of money :evil: Straight away you can see water stains, cracks and other nasties appearing in these fast 'knock them up' units. Some you can even see the render coming off the walls.

I put it down to cheap materials and quick job by the renderer that probably is only being paid a bare minium to do the job. Other reasons...house is built on moving ground therefore cracks are inevitable.

Mrs B

Author:  stonecutter1309 [ Nov 05, 2008 12:11 pm ]
Post subject: 

Bobcat Bobcat
turnerl turnerl
I heard someone talking of, "acrylic render" that costs a bit more but requires no maintenance, might be worth looking into?
That might be what they call acratex made by Dulux. i was told its alot more waterproof then usual sand cement render. This is what they rendered our house with. they told us that its more expensive but takes half the time.

May also be the Moroka product which is also acrylic.

Author:  Bam [ Nov 05, 2008 6:18 pm ]
Post subject: 

Mrs B Mrs B
Bam Bam
Excuse my ignorance, but there are alot of newish houses that i see where the render has something like water stains, marks and cracks on areas close to the roof... Is this due to it being a particular type of render (bagging/moroka????) or workmanship?


Hi Bam..I have noticed this to, particularly with the cheaply built, nasty townhouse developments in my area that are sold for a ridiculous amount of money :evil: Straight away you can see water stains, cracks and other nasties appearing in these fast 'knock them up' units. Some you can even see the render coming off the walls.

I put it down to cheap materials and quick job by the renderer that probably is only being paid a bare minium to do the job. Other reasons...house is built on moving ground therefore cracks are inevitable.

Mrs B


Thanks Mrs B :)

I wasnt sure whether is was prone to a particular type of render or not. Funny enough, I see it mostly in townhouses too!

Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/