Browse Forums Bathrooms and Laundry 1 May 09, 2011 8:53 am Hi! The wall tiles in my bathroom were replaced about 5 years ago but for some unknown reason the floor tiles in the bathroom and the shower were left the original wavy mustard colour (everything else is white). How much would it cost to have these tiles replaced to something more neutral? I know that without tile type etc it is hard but a ball park figure would be helpful. I am already planning on having the toilet retiled also. The bathroom is 2m by 5m. With the shower about 1m by 1m. Is it possible to just replace these tiles or would the wall tiles need to be replaced also? Any help would be greatly appreciated! Re: bathroom and floor tiles only 2May 09, 2011 3:36 pm Hi there, You should be able to just pull up the floor tiles and replace those. I just recently purchased some wall tiles and wall tiles for my laundry and the cost for the wall tiles was $22/m2 (a basic white 10cm x 20cm wall tile) and the cost for the floor tiles was $58/m2 (hexagon mosaics). We'll be laying the tiles ourselves. My blogs: http://www.movingtotasmania.com.au - a resource for those considering relocating to Tasmania http://www.sarahandtim.com - my daily life and renovation blog Possibly both depending on the sizing. Idea of working from the centre is that you dont have a 20mm thin tile at one end and a 400mm at the other end. A quick search on… 3 8423 This is a very tight fit, I'm not sure if you'll be able to achieve what you've described. Would you consider accessing the separate toilet from the laundry? If so maybe… 1 11258 Have had a few issues with out recently done bathroom floor. Probably around 18 months old First there has been been a crack running through a grout line which I put… 0 2182 |