Browse Forums Bathrooms and Laundry 1 Aug 26, 2020 7:56 pm Hi guys, So i am uninstalling this door privacy handle for my bathroom and stuck here as the pictures below. I can't seem to take that thing out. I searched on youtube and google for hours and couldn't find one. They all are different kind of door handle or "how to install" only. Please help. Thank you!! Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: Help me! 2Aug 26, 2020 9:37 pm The spindle will just slide (or should) out. Some spindles have little tabs on them that stop them sliding right through and with those you need to slide it one way. Most spindles just slide straight through. It may have worn over the years and have got itself stuck a little. If you can see that the spindle hasn't got the little tabs on it just give it a hit on the end and it should push through. It would help if you could get someone to put some pressure on the latch while you do that so it doesn't move in the door and damage it. Hope that makes sense Accessible Carpentry & Cabinets accessiblecarpentry@gmail.com accessiblecarpentry.com.au https://www.facebook.com/pages/Accessible-Carpentry-Cabinets/583314911709039 i had the my concreters concrete right up to the fence. I have pits all along my path, so the water tends to drain away from the house and into the pits. There's only one… 7 13435 Hi there, I'm a conplete newbie to this, but I'm looking to put a floor down in my 6x9m shed. It's currently sitting on a 100mm thick concrete perimeter (dirt floor… 0 6938 Hi VK, Think it's worth investing time in an Owner Builder course to equip you with basic knowledge on Australian Building Industry and its regulations. Also, I suggest… 11 25007 |