Browse Forums Heating, Cooling & Insulation 1 Jan 03, 2022 7:46 pm Hi I have some leftover polyster R1.5 (used for underfloor) that I plan to use between my rafter for my old pitched roof. See photos. As the roof hole is too small, I cannot use foamboard, so have to use Batt. I plan to staple it between the rafter. What brand do you recommend and what R value? These seem to fit ok (I have 3 bags left that I plan to use) https://ecomasterstore.com.au/products/ ... etEALw_wcB Also, does anyone know where to get those foldable rectangular plank so that I can put a ladder on a horizontal surface in the actic? Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Thanks David Hi, we live in an area where the black soil is prone to a lot of movement. We have an old 50's house with masonite everywhere and nails popping out, warping, rusted etc.… 0 4777 Hi I bought an old cupboard that is in desperate need of some TLC. I was seeking some advice as to the best product to use to give it an oil but also bring it to life a… 0 3625 Your house roof does not show rusting other than some surface rust on the flashings. In my opinion you dont need to replace or paint the roof other than treat surface rust… 1 10724 |