Browse Forums General Discussion 1 Apr 24, 2024 11:46 am Hi Everyone, Looking for opinions on how to orient the fall planes in the balcony screed before tiling. I have uploaded a photo with 3 options. I am wondering if number 3 is viable as I would like to avoid diagonal relief cuts and also don't want to tile diagonally. The tiles are 300x300. The only downside with 3 I can think of is that the fall plane will change direction in the middle of the outside edges (will this be noticeable) Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ . Hi all, We're curring working on our outdoor and have some questions in relation to screed. I've tried to find information online, without success. Apologies for the… 0 3452 Currently renovating, and our main lounge is 5m x 10m, with a cathedral roof peaking at 6.5m high. Currently have tiles on concrete slab. Room is very hard to heat. I am… 0 5324 Levelling compound also works well for this, you can feather it and it doesn’t self level at this low thickness , you can build up in layers if need be. 2 7390 |